Comments on: Burgtec Penthouse Flats

By: Burgtec

Burgtec — Fri, 05 Aug 2011 22:47:50 +0000

Keep an eye on the site, these should be up soon. Hopefully with a video too.

By: Burgtec

Burgtec — Wed, 13 Jul 2011 08:39:30 +0000

Hi Mario

Yeah no problem.

Tools needed

15mm spanner and 10mm spanner

remove end cap with a 15mm spanner.

Place 15mm spanner on the axle and the 10mm spanner on the nylock nut and remove the nylock nut.

Once the nylock nut has been removed this will allow you to pull the axle out.

Remove the axle and take out the old internals and seal.

The old bush will be still inside so push that through the body by placing the spacer on top of the bush and tap it through.

Once old the old internals have been removed clean out the barrel on the pedal removing any dirt and debris

Now to put the new internals in. Push the new bush in we recommend using a press. Your local bike shop should have one.

Put the seal on

Grease the bush

Then put bearing, 2 shims, bearing, spacer, washer (only use washer if the axles are silver not gold).

Put axle in and put the nylock nut on the top and tighten back up. Just tighten the nylock nut up don’t hang off it.

Then put the end cap on tighten that up and the pedal should be rebuilt

Any problems let me know. Give me a call or send them back in if you need me to service them.

Cheers Dave

By: mario govers

mario govers — Tue, 12 Jul 2011 23:23:09 +0000

is it possible to give me some advise “how to change/use new bearingkit”???

Thx allready !!!

MG.

By: NeilB

NeilB — Sun, 17 Apr 2011 10:06:43 +0000

These pedals are unbeatable and pretty much bombproof,
I really do love mine.
Your feet feel so stable and planted it’s amazing.
Thanks Burgtec.

By: Vittorio

Vittorio — Sun, 31 Oct 2010 09:33:17 +0000

Hi there,
I need to buy a set of replacement pins for Mk3. Chain reaction has been out of stock for ages. Where can I buy them from ?

By: LUIS

LUIS — Wed, 07 Apr 2010 13:17:59 +0000

THANKS DAVE,THE PEDALS NOW ARE OK
YOU HAVE A NICE DAY.
THE BEST PEDALS.

By: Orange Bikes Demo Day in Epping Forest « My First Triathlon

Orange Bikes Demo Day in Epping Forest « My First Triathlon — Sun, 24 Jan 2010 19:04:26 +0000

[...] and near perfect weight distribution. A few stand out points on the non-stock finishing gear, the Burgtec Penthouse flats are 10/10 for stability, about 50% more contact area than a pair of Shimano DX – loved them! [...]

By: Isaac

Isaac — Thu, 07 Jan 2010 05:13:53 +0000

A hoi hoi Burgtec – 2 weeks ago I picked up a set of these at my fav LBS, For the Riders in Brisbane, Q, Oz. I’ve thrown down about 40 runs since then; rain, mud, hail n shine and all I can say is wicked – best flat pedal I’ve ridden in 20yrs!